Only in Titles

           Search results for: Rectangular cover glass   

paperclip

#23493124   // Save this To Up

A humidity sensing organic-inorganic composite for environmental monitoring.

In this paper, we present the effect of varying humidity levels on the electrical parameters and the multi frequency response of the electrical parameters of an organic-inorganic composite (PEPC+NiPc+Cu2O)-based humidity sensor. Silver thin films (thickness ~200 nm) were primarily deposited on plasma cleaned glass substrates by the physical vapor deposition (PVD) technique. A pair of rectangular silver electrodes was formed by patterning silver film through standard optical lithography technique. An active layer of organic-inorganic composite for humidity sensing was later spun coated to cover the separation between the silver electrodes. The electrical characterization of the sensor was performed as a function of relative humidity levels and frequency of the AC input signal. The sensor showed reversible changes in its capacitance with variations in humidity level. The maximum sensitivity ~31.6 pF/%RH at 100 Hz in capacitive mode of operation has been attained. The aim of this study was to increase the sensitivity of the previously reported humidity sensors using PEPC and NiPc, which has been successfully achieved.

1395 related Products with: A humidity sensing organic-inorganic composite for environmental monitoring.

MarkerGene™ LysoLive™ MOUSE ANTI BOVINE ROTAVIR Bone Morphogenetic Protei Growth Differentiation Fa Amplite™ Fluorimetric F MOUSE ANTI BORRELIA BURGD succinate-CoA ligase, GDP formin-like 1 antibody So succinate-CoA ligase, ADP Primary antibody Caspase Primary antibody FLIP An Glucose Assay With the La

Related Pathways

paperclip

#17462088   // Save this To Up

Platelet adhesion onto immobilized fibrinogen under arterial and venous in-vitro flow conditions does not significantly differ between men and women.

Gender-related differences in incidence of arterial thrombosis have been a focus of interest for years. The platelet integrin alphaIIbbeta3 is primarily responsible for the interaction between platelets and fibrinogen and consecutive thrombus growth. In this study, we evaluated platelet adhesion onto immobilized fibrinogen under venous and arterial flow conditions in men and women.

2122 related Products with: Platelet adhesion onto immobilized fibrinogen under arterial and venous in-vitro flow conditions does not significantly differ between men and women.

Androgen Receptor (Phosph Androgen Receptor (Phosph Rabbit Anti-Human Androge Rabbit Anti-Human Androge Androgen Receptor (Ab 650 AZD-3514 Mechanisms: Andr 17β-Acetoxy-2α-bromo-5 (5α,16β)-N-Acetyl-16-[2 (5α,16β)-N-Acetyl-16-ac 5α-N-Acetyl-2'H-androst- 5α-N-Acetyl-2'H-androst- 3-O-Acetyl 5,14-Androstad

Related Pathways

paperclip

#17309793   // Save this To Up

HPA-1 polymorphism of alphaIIbbeta3 modulates platelet adhesion onto immobilized fibrinogen in an in-vitro flow system.

Platelet adhesion and subsequent thrombus formation on a subendothelial matrix at the site of vascular damage play a crucial role in the arrest of posttraumatic bleeding but also in different pathological thrombotic events, such as acute coronary syndrome and stroke. Recently published studies have clearly demonstrated that platelet integri alphaIIbbeta3 is intimately involved in the occlusive thrombus formation at the site of endothelial damage. Therefore, any genetic variation in the expression of this receptor may lead to an excessive bleeding or excessive thrombus formation. In this study, we evaluated the influence of HPA-1 polymorphism of integrin alphaIIbbeta3 on platelet adhesion onto immobilized fibrinogen using an in vitro system simulating blood flow.

2812 related Products with: HPA-1 polymorphism of alphaIIbbeta3 modulates platelet adhesion onto immobilized fibrinogen in an in-vitro flow system.

Rabbit Anti-intestinal FA Rabbit Anti-APIP Apaf1 In Rabbit Anti-APIP Apaf1 In Rabbit Anti-TNIP2 ABIN2 T Rabbit Anti-TNIP2 ABIN2 T Rabbit Anti-Cell death in Rabbit Anti-Cell death in Anti AGO2 Human, Monoclon Anti AGO2 Mouse, Monoclon anti HCMV IE pp65 IgG1 (m anti HCMV gB IgG1 (monocl HIV1 integrase antibody,

Related Pathways

paperclip

#17106892   // Save this To Up

Frontal bone defect repair with experimental glass-fiber-reinforced composite with bioactive glass granule coating.

The aim of this preliminary study was to test the bioactive glass-coated fiber-reinforced composite (FRC) as a reconstruction material in the treatment of experimental defects in the frontal bone of rabbits.

1097 related Products with: Frontal bone defect repair with experimental glass-fiber-reinforced composite with bioactive glass granule coating.

Cell Culture Chamber slid Angiogenesis (Human) Anti Angiogenesis (Human) Anti Angiogenesis (Mouse) Anti Apoptosis (Human) Antibod Cytokine (Human) Antibody Cytokine (Human) Antibody Cytokine (Human) Antibody Cytokine (Human) Antibody Cytokine (Human) Antibody Cytokine (Human) Antibody Cytokine (Human) Antibody

Related Pathways

  •  
  • No related Items
paperclip

#15117208   // Save this To Up

Design, fabrication, and evaluation of microfabricated columns for gas chromatography.

The design, fabrication, and performance of gas chromatography columns etched in silicon substrates are described. Deep reactive-ion etching formed the 3-m-long, 150-microm-wide, 240-microm-deep rectangular cross section channels. A glass cover plate was anodically bonded to the remaining surface of the substrate forming the gastight channel. For some of the columns, the silicon channels were oxidized before the channels were sealed with the glass plates. Fused-silica capillary connecting tubes were sealed into ports on the edge of the 3.2-cm x 3.2-cm substrate chips. Dynamic coating was used to deposit a film of nonpolar dimethyl polysiloxane or moderately polar trifluoropropylmethyl polysiloxane stationary phase. The columns were evaluated in a conventional benchtop GC instrument with split injection and flame ionization detection. Column efficiency was evaluated by the use of plots of height equivalent to a theoretical plate versus average carrier gas velocity using both hydrogen and air as carrier gases. The number of theoretical plates measured at the average carrier gas velocity giving the minimum plate height ranged from 4600 to 8200 plates for the dimethyl polysiloxane columns and from 3500 to 5500 plates for the trifluoropropylmethyl polysiloxane columns. Minimum plate height was significantly smaller with air as carrier gas. For the nonpolar phase, the nonoxidized surface gave approximately 1500 plates more than the oxidized surface for both carrier gases. For the polar phase, the oxidized surface gave approximately 200 plates more than the nonoxidized surface. Isothermal chromatograms of a 20-component multifunctional mixture and temperature-programmed chromatograms of a normal alkane mixture are presented.

2878 related Products with: Design, fabrication, and evaluation of microfabricated columns for gas chromatography.

Cellufine Formyl , 50 ml Cellufine Formyl Media Cellufine Formyl , 500 ml Cellufine Formyl Media Cellufine Formyl Media Formalin Solution (20%) Formalin Solution (20%) Formalin Solution (20%) Formalin (10% Neutral Bu Formalin (10% Neutral Bu Zinc Formalin Solution Zinc Formalin Solution

Related Pathways